Monitoring Sensor Unit - Linear Series

Description

Monitoring sensor units detect leaks through spot detection or attached leak detection cable and communicate directly to the connected MDU. MSUs can be chained together to create up to 8000 digital zones so multiple leaks can be precisely located in both long run applications and high-density rack applications.

Linear Series MSUs connect downstream of the Linear Series MDU over XD2 Bus. The MSU is powered directly by its attached MDU and requires no local power supply or batteries. Each MSU monitors one rope attached directly to its output. After the rope, connect the next MSU directly or through an XD-LIN-JMP non-sensing section. Use Linear-only branch and termination accessories

Technical resources for this product are to be released shortly.

Technical Specifications

Power

XD2 Bus

XD2 Bus Input: (1) M12 A Code male connector for XD4 Bus input
XD2 Bus Output: (1) M12 A Code female connector for XD4 Bus output to LIN-ROPE segment
XD2 Bus Sense Ropes: Attach (1) XD-LIN-ROPE segment (available in multiple finished lengths) on the output of each LIN-MSU
XD2 Bus Jumpers: For non-sensing segments, use XD-LIN-JMP-xxx bus jumpers from the end of LIN-ROPE to the next LIN-MSU or LIN-BRANCH
Maximum Bus Length: 3,200 feet (total of LIN-ROPE and LIN-JMP lengths)

Operating Environment

Temperature: 41° to 140°F (5° to 60°C)
Humidity: 5% to 95% RH, non-condensing
Altitude: 10,000ft (3048m) max
Storage Temperature: -4° to 158°F (-20° to 70°C)

Enclosure

IP40 rating

Mounting

Mount with zip ties, clips, adhesive, etc.

Certifications

CE; TUV: conforms to UL 61010-1, EN 61010-1; certified to CSA C22.2 NO. 61010-1; RoHS compliant