As you install your leak detection system, we would like to highlight some of our accessories that can make your job easier and your leak detection system more effective.
X-Connector
- X-Connector for easy cable branching (two end-of-line terminators are included)
The X-Connector (X-CON) allows for branching of SeaHawk sensing cable and non-sensing cable. With one input and three outputs, the X-CON addresses the need for multi-directional cable runs. Each of the three outputs has a built-in weighted cable connector to simulate 50 feet (15.24m) of sensing cable and provide for enhanced leak location identification. The X-CON includes two end-of-line (EOL) terminators. It does not affect the read accuracy, although it does add 50 ft. (15.24m) to the overall cable length for each output used.
Weighted Cable Connector
- Weighted cable connector simulates 50 ft. (15.24m) of leak detection cable
The weighted cable connector (WCCS) simulates 50 feet (15.24m) of sensing cable. It provides a distinct separation between sections of sensing cable for enhanced leak location identification and is most commonly used between floors or rooms.
Sensing Cable Adapter Kit
- Adapter kit for sensing or non-sensing cable
Did you just discover that the sensing cable or non-sensing cable has been installed incorrectly, and a male connector is where a female connector should be (or vice-versa)? Rather than having to undo all the work that has already been done, use the sensing cable adapter kit. It contains one male/male and one female/female connector and eliminates the need to remove and reinstall cable.
Order Today
To order any of these items, contact RLE Sales at 800.518.1519 or sales@rletech.com.